CHOOSE YOUR CAR
Volkswagen - Mechanical Odometer Gear There are potentially two gears that can go bad. First is the gear on the side of the speedometer. If your gear is metal then you will not need this gear. If it is plastic inspect closely where the shaft comes through the gear as there will generally be a hairline crack and the gear must fit tight. $25.00 Select a style: M10 tooth count M11 tooth count 11.00mm dia VW11 tooth (MPH) 8.65mm dia M12 tooth count 11.30mm dia VW12 tooth (KPH) 8.65mm dia M13 tooth count M14 tooth count M15 tooth count M16 tooth count 12.0 mm M16B tooth count 11.65mm dia (Vanagon) M17 tooth count M18 tooth count M19 tooth count M21 tooth count M25 tooth count
Volkswagen - Lead Odometer Gear Second is the lead gear on the same rail. Check to make sure it is tight on the shaft. Using a small screwdriver, see if it spins on the shaft. If it does, you should replace this gear as well. There are three sizes. All you need to do is measure the overall thickness. $25.00 Select a style: 1/8 = 3.175mm 3/16 = 4.7625mm 1/4 = 6.35mm
Volkswagen -Specific Gear ( view PDF instructions ) It is highly recommended to inspect the old gear before ordering. These gears can and will be found in all VW's, the gears are different. If your old gear does not have a 3.5mm collar and measure 8.65mm dia. then you need a standard mechanical gear that you can order above. $25.00 Select a style: VW 11 tooth (MPH) 8.65mm diameter M11 tooth count 11.00mm diameter VW 12 tooth (KPH) 8.65mm diameter M12 tooth count 11.30mm diameter