Volkswagen - Mechanical Speedometer
VW
If your old gear has 11, 12, or 16 teeth
YOU HAVE TO MEASURE
the old gear to determine the correct gear to order.
Volkswagen - Mechanical Odometer Gear
$25.00
Select a style:
M10 tooth count
M11 tooth count 11.00mm dia
VW11 tooth (MPH) 8.65mm dia
M12 tooth count 11.30mm dia
VW12 tooth (KPH) 8.65mm dia
M13 tooth count
M14 tooth count
M15 tooth count
M16 tooth count 12.0 mm
M16B tooth count 11.65mm dia (Vanagon)
M17 tooth count
M18 tooth count
M19 tooth count
M21 tooth count
M25 tooth count
There are potentially two gears that can go bad. First is the gear on the side of the speedometer. If your gear is metal then you will not need this gear. If it is plastic inspect closely where the shaft comes through the gear as there will generally be a hairline crack and the gear must fit tight.
Volkswagen - Lead Odometer Gear
$25.00
Select a style:
1/8 = 3.175mm
3/16 = 4.7625mm
1/4 = 6.35mm
Second is the lead gear on the same rail. Check to make sure it is tight on the shaft. Using a small screwdriver, see if it spins on the shaft. If it does, you should replace this gear as well. There are three sizes. All you need to do is measure the overall thickness.
Volkswagen -Specific Gear
(
view instructions
)
$25.00
Select a style:
VW 11 tooth (MPH) 8.65mm diameter
M11 tooth count 11.00mm diameter
VW 12 tooth (KPH) 8.65mm diameter
M12 tooth count 11.30mm diameter
It is highly recommended to inspect the old gear before ordering. These gears can and will be found in all VW's, the gears are different. If your old gear does not have a 3.5mm collar and measure 8.65mm dia. then you need a standard mechanical gear that you can order above.