***********************************************************

Z3 Seat Bushings
$30/both seats — Kit includes eight parts which is enough to fix both seats in the car. This is a permanent repair. The OE version is made with the same rubber that is prone to fail again. (OE #52-10-7-137-499)

Z3 Seat bushings How To (PDF)

***********************************************************

E-39 Headlight Adjusters (2000-2003 Halogen or Xenon)
$85/side — Kit includes both male plastic parts that are broken in your headlight and a tool to remove the broken ball in the female side.
Good for either left or right sides. Made from 20% glass filled Delrin® .
(1st)E39 Headlight Adjusters How To (PDF)
(2nd) E39 Headlight Adjusters How To when the lens can not be removed (PDF)
(3rd) Reference the above two first!! E39 Headlight Adjuster FAQ (PDF) --Odometer Gears does not recommend using the oven-- Thank you David Voynow

***********************************************************

E36 Reclining Seat Gear (White)/Except Z3
$40/each — Recline Drivers side all years
Passenger seats from 1993.5-1997.5

(1997: always best to inspect old gear before ordering)

E36 Seat Gear How To

***********************************************************

E36 Reclining Seat Gear (Green)/Except Z3
$40/each — Recline Passengers side 1992-1993.5, 1997.5-2000

(1997: always best to inspect old gear before ordering)

E36 Seat Gear How To

***********************************************************

E36 Bottom Seat Gear (Pink)/Except Z3
$40/each — Bottom Seat adjustment gear. Same in both seats

E36 Seat Gear How TO

***********************************************************

E31 840/850 Seat Gears- Made to Order

$50.00/each — We Currently have several gears made and available for shipping

***********************************************************

Euro spec E23, Vixen Motor Home and LaForza

There may be more options that we do not know about. If you have a different tooth count, please call or email.
Photos are not to scale

20x23 tooth gear

***********************************************************

E1, E2, E3 Gear Set (Electronic VDO Units)

See below for instructions on how to replace the E1, E2 and E3 gears.

VDO and MotoMeter Gear Replacement How To

E1 or the drive gear is a standard 12 tooth gear.
E2 is also a standard gear and will be 48 x 12. (Original gear color is Black)
E3 will be a standard 48 outside and could be 12, 14, 16, 17 and 19 tooth on the inside. (Original gear color is amber to orange in color)

APPLICATION LIST

 

$65/set — Save $10 when you buy the whole set.
Please include a tooth count for the inside gear of E3, (12, 13, 14, 17, 19)

To order set with inner tooth count for E3

set with 12 tooth inner count set with 13 tooth inner count set with 14 tooth inner count set with 15 tooth inner count set with 16 tooth inner count set with 17 tooth inner count set with 18 tooth inner count set with 19 tooth inner count

Please include a tooth count for the inside gear of E3.
(12, 13, 14, 17, 19 teeth)

E1 - (12 tooth gear) (Individual Gear)	E2 - 48x12 (Individual Gear)	E3 - 48x(12,13,14,17,19) Inner tooth count for E3 (Individual Gear)
		Inner tooth count for E3 12 tooth inner count 13 tooth inner count 14 tooth inner count 15 tooth inner count 16 tooth inner count 17 tooth inner count 18 tooth inner count 19 tooth inner count

***********************************************************

Motometer Units for E30/R/K series Motorcycles

VDO and MotoMeter Gear Replacement How To
These units were found on several years of  3 series BMW's. Look on the circuit board to verify which unit you have. To order individual gears see below.

$85/set — Save $15 when you order the whole set.

E30 BMW US Spec (SET) motometer#1 12 motometer#2 44x16 motometer#3 40x22 motometer#4 35x22

Asian/Euro Spec E30's; R and K series Motorcycles: Series 1(SET)  motometer#1 12 motometer#2 44x16 motometer#3 40x28 motometer#4 28x22

Asian/Euro Spec E30's; R and K series Motorcycles: Series 2 (SET) motometer#1 12 motometer#2 44x17 motometer#3 38x23 motometer#4 33x26

Portugal Spec E30's; R and K series Motorcycles:   Series 4 (SET) motometer#1 12 motometer#2 43x16 motometer#3 39x28 OEM is Red motometer#4 28x22 inside gear is start, OEM is Tan

*********************************************************

To order individual MotoMeter Gears please select below. If you need a four gear set with a tooth count not listed above please email us the tooth counts needed and we will send a PayPal money request for the $85 set price. $25/each E1=12 tooth drive gear MM2=44x16 MM2c=44x17 MM2d=43x16 MM2e=43x17 MM3=40x22 MM3b=40x28 MM3c=38x23 MM3d=38x28 MM3e=39x28 MM3f=40x34 MM4=35x22 MM4b=28x22 MM4c=33x26 MM4e=28x22 star MM4f=23x22